UK Knives and Tools
Model UK1 - Outdoor and Work Knife - Black Edition
Model UK1 - Outdoor and Work Knife - Black Edition
The UK1 model is an all-round model that stands out due to its strong leaf-shaped blade. The grooves in the back of the knife allow the thumb to hold the blade securely and exert strong pressure on the cutting edge, which enables precise work.
The UK1 is designed as a work knife, but also excels as an outdoor, carving and camping knife. The handle made of a plastic reinforced with glass filament (G-10) has a pleasant feel, is robust and durable. The knife sheath is made of Kydex with a leather cover.
The blade is made of a robust, rust-resistant Swedish steel, Sandvik 14C28N, and a personal engraving can be selected free of charge.
The Black Edition features a Cerakote-coated blade in deep black. It is combined with black handle scales and a matching black knife sheath.
Couldn't load pickup availability
Collapsible content
Dimensions and weight
- Blade thickness: 3.0mm
- Main cut: hollow ground
- Sharpening angle: 17° / 34° on both sides
- Blade length: 80mm
- Total length: 188mm
- Weight: 100g
- Weight including sheath: 180g
Knife steel
Sandvik 14C28N: Swedish steel with high hardness and edge retention, high toughness, good sharpenability and corrosion resistance. Hardness 60-62HRC
Böhler M390: Powder metallurgical steel with extremely high wear resistance, meaning the blade stays sharp for a very long time. In addition, it is highly tough and corrosion-resistant. Hardness 62-63HRC
Each knife is tested on a hardness tester.
Blade treatment and coating
After the main grinding and fine grinding, the knife steel is given a very thin Cerakote coating. Cerakote is a ceramic that is used for coating weapons. It is extremely hard and wear-resistant, offers corrosion protection and creates a special aesthetic. However, even a Cerakote coating will wear off over time as the knife is used.
Knife sheath
The UK knife sheath is a Kydex-leather hybrid. It is made of Kydex plastic on the inside and leather on the outside. This makes it dimensionally stable and moisture-proof like a Kydex sheath, but has the classic look and aesthetics of a pure leather sheath.
The matching UK belt loop is suitable for belts up to 45mm wide, can be worn in 3 positions and can be adjusted with the included key.
TEK-LOK compatible: The UK belt loop can be easily replaced with a TEK-LOK and Small TEK-LOK.
ULTI-CLIP compatible: The UK belt loop can be easily replaced with a ULTICLIP SLIM2.2 carrying system. Thanks to the ULTI-CLIP, the knife sheath can also be worn without a belt and in a trouser pocket.
When ordering CUSTOM, you can also choose a TEK-LOK or ULTICLIP instead of the standard installed belt loop
Delivery time
All knives and knife handles are manufactured individually for the customer only after the order has been placed. The production time is 7-10 days, so the delivery time within Germany and the European Union is around 14 days.
Orders from outside of the European Union may take longer due to customs formalities, etc.
Care and maintenance
If the knife becomes dirty, it can be cleaned with soap, dishwashing detergent, etc. Cleaning in the dishwasher is not recommended.
The leather sheath should be treated with leather wax every few months.
Exchange and warranty
All knives and tools we manufacture are individually tested before being delivered.
We offer a lifetime waranty on the knife steel for all of our knives when used as intended. If there are any defects, an exchange or repair is possible at any time.
For further information please read the cancellation policy (at the bottom of the page)